Pressing

Multi-Press

RPG

A new robustness! The rugged base frame in conjunction with the huge variety of clamping elements make our press the professional solution!

Advantages:

  • Base frame made of thick-walled hollow section bolted (no problems during transport or on assembly)
  • surface powder-coated
  • manual hydraulics with a stroke of 100 mm and a compressive force of up to 2.000 kg
  • clamping units easily movable on ball-bearings
  • precise alignment of holes at intervals of 50 mm

Highlights

An investment in the future of your company

The BARTH Multi and Frame Press RPG is a universally applicable modular system with which the most diverse gluing operations can be carried out quickly and cost-effectively. Depending on the equipment, this BARTH multi-press can simultaneously be a frame press, a carcase press or a press for processing panels or frames. Increase your efficiency significantly. Reduce manufacturing costs in the woodworking sector and create comfortable working conditions for complicated gluing work.

The advantage of the frame press RPG

The RPG multi and frame press is a universally applicable multi press system. The hydraulic frame press reaches a pressing pressure of up to 2,000 kg and produces even and resilient glue joints. Use it to glue frames, miters, panels and racks. Use the system as a flexible carcase press. The proven modular system enables gluing work of many kinds, quickly, cost-effectively and with high performance and quality. With the retrofittable accessories, you can easily and quickly adapt the frame presses to changed requirements.

Variability

Variable-height work surfaces and press cylinders allow ergonomic working in a comfortable posture. Clamping the parts hydraulically is considerably more effort-saving than with screw clamps. Sick leave decreases and your employees are more motivated! Every hydraulic gluing press from our company convinces by high quality. The solid base frame is made of thick-walled profiles. The compact design ensures that our multi-press system can be used without problems even in smaller workshops.

BARTH develops and manufactures universal system presses for efficient processing

They have been especially developed to carry out sizing work in a quick and cost-effective way. Productivity in your workshop increases and you save time. Even intractable wood cannot withstand the system presses. With a clamping force of up to 2,000 kg, they bring each piece into the correct position with the turn of your hand. Customers always expect 100% quality with strong and uniform glued joints. BARTH system presses are a future-proof investment.

Testimonials

Greatly simplified our working processes

„We are using the BARTH MULTI Press now. We were on the lookout for such a device for a long time and are now very happy that we have this press. This has greatly simplified our working processes. A single worker can glue carcasses, drawers, table boards and a lot more. Otherwise two workers are always needed when working with traditional clamps. Everything which we produce in our workshop is glued in this press.“

 

Roland Oberlader

Roland’s Joinery

Telkwa, British Columbia

Never seen such well packed machinery

„It is a beautiful day in middle on February 2015 in CA and today my BARTH VMP3513 membrane press did arrive. When I saw the semi pull up and the size of the box I was shocked. I purchased some 60” forklift extensions which made the unload very easy. If I did not have the extensions I would not have been able to unload it. The driver was very nice and helped get it down the driveway – I had him use the pallet jack on the end while I used the forklift to steer it to the front of the garage. I then took the press off the crate and moved it to the shop using the forklift and a pallet jack. The crate was built like a tank and was quite hard to take apart. I guess that they justify the price of the crate based upon the number of nails. I had a friend come over tonight to help get it into the shop, I did the main job of getting it out of the crate this morning. I have never seen such well packed machinery than what has come from Barth.“

 

Bespoken Woodworks

Sierra Madre, CA

Approximately 35% quicker

„Working for years with a traditional American-style vacuum bag and pump, we already knew what a vacuum system like this could do for us. With the BARTH VMP4013 we quickly learned there were even more differences compared to our old system. Because of the oil lubricated pump, now we accomplish our jobs approximately 35% quicker and have more pressure. The pressure is approximately 2000 lbs. per square foot. When the press is not in use, the convenient cover protects the rubber membrane and it can be used as a temporary work bench. Casters allow us to move the machine to the work instead of the other way around. All in all, this press has improved our production in many different ways.“

 

Peter Craz

Craz Woodworking Associates

Bellport, NY

Positive result of a higher productivity

The BARTH VacuucarXL helps our worker with up to three vacuum suction cups to hold the workpiece in place so that our workers have booth hands free for doing their job. The possibility to set up the height of the work plate to the needed height helps our workers to reduce their health problems what has the positive result for us of a higher productivity.

 

Edwards & Wilson Cabinet Makers

Toronto, Canada

Save a lot of set up time

„The BARTH VP vacuum membrane press replaces in our workshop the traditional vacuum back. With the press we save a lot of set up time before the real gluing/pressing process and in case in case of the natural rubber membrane we do not need to use double boards at regular veneer jobs. With the right glue (regular water based glue) we save here at so much time that the press will be paid back by itself soon. The Barth special membrane is a big difference to each other product that is available on the marked and makes a big difference.“

 

Edwards & Wilson Cabinet Makers

Toronto, Canada

Energy costs are reduced by 99%

„We use BARTH vacuum membrane presses to veneer and glue molded parts. The BARTH presses have convinced us because due to their proven technology the pressing time is very short and as no heating is necessary, the energy costs are reduced by 99% compared to heated-plate presses. The pressing time for veneer is only 6-8 minutes when standard water-based glue is used.“

 

Conrad Schrock

Rockwood Door & Millwork

Millersburg, OH

RPG

Don’t hesitate to contact us!

    Company
    First name *
    Last name *
    Street *
    Nr. *
    ZIP Code *
    City *
    Country *
    E-Mail Address *
    Phone
    Message
    Yes I have taken note of the privacy policy.

    * = Required field

    to top