Giant Dual CC

„I have a cabinet shop in Southern California.  I was in the market for a new sander and have had a few widebelt models in the past. The main reason that I was upgrading was that I needed a machine with 53” width and the ability to sand veneered panels without damage. I had previously owned a double head 43” sander with air platen and did not trust the machine when sanding veneered panels. It was always a job for hand sanding, which is expensive and time consuming.The WEBER sander has a few features that make sanding difficult parts a breeze. First of all the machine has a segmented platen which uses 22 mm air cylinders to control the pressure of the platen. […] The machine with variable speed on both the sanding heads and the conveyor belt is setup for lacquer sanding.  The belt speed is slowed down, and the feed is sped up.  With the CBF head the machine does very short sanding strokes, which does not load up the paper. The automatic belt cleaning during this program cleans the sandpaper. What happens is almost magical and the results are stunning.

The build quality of the WEBER is first class. The machine is made almost 100% at their factory in Bavaria Germany. WEBER makes metal sanding machines that are workhorses and uses this same heavy-duty construction in the wood line.  The electronic parts are either Siemens or Toshiba and can be sourced overnight if the machine needs repairs (so far no issues with my sander).

I could not be happier with my purchase. I have had 2 other German sanders and neither one compares with the WEBER.“

Scott Slater
Bespoken Woodworks
Sierra Madre, CA

„I am building high end custom furniture and for this I needed the right machines for precise and quick results. I chose the Weber wide belt sander because it gives me the best flexibility for solid wood, veneer and lacquer/sealer sanding. With the patented WEBER CBF system, I get almost no oscillation and the few marks left are removed by the patented Weber planetary brush head aggregate. The planetary head not only takes the marks away it also can sand deep into profiles and breaks the edges so that we do not need to sand by hand anymore.
I also purchased a tilting arbor MARTIN T27 Flex shaper, T45 thickness planer, T54 jointer and the T75 Prex dual-tilting sliding table saw. These machines are heavy duty and carry with them a great resale value…something that you do not see much anymore with industrial woodworking machinery.“

Isaac B. Hayun

Trieste Corp.

Long Island City, NY

„At Meridian Products we produce high quality kitchen cabinet components. Our doors and drawer fronts can have solid wood raised panels or veneer panels.  With the old technology wide belt  sanders in our panel line we were required to  do a lot of hand orbital sanding to get the quality level  our customers needed.  We identified our requirements and researched several brands and did some live demonstrations. After traveling to NY to demo the patented CBF system we chose to purchase two WEBER machines, a three head calibration sander and a two head finish sander. The machines are well built and easy to operate.  We have successfully reduced our sanding labor and are producing a more consistent finish.“

Meridian Products

New Holland, PA

„At Cozzolino we produce high quality furniture for our customers in New York. For the final sanding we didn’t have a perfect solution so we checked out different wide belt sanding machines. We decided to go for the WEBER KSN-2-1350 (DM) Compact as we achieved the best sanding results with this machine. The WEBER sander stands out for its ease of use and with the Siemens components it is guaranteed that the electrical spare parts are available for many years to come.“

Peter Craz
Cozzolino Custom Millwork Inc
West Orange, NJ